You can now replace it and your jammed deadbolt lock saga is over.Ī jammed deadbolt lock is a frustrating problem, but with a little patience is one any DIYer can tackle.
Open the door towards you and find the lock. It is time to remove the sliding bolt mechanism. It should loosen the jam quite easily from this angle. Place a flathead screwdriver into the shaft and try turning it by hand. Use utility knife to mark mortise outline for strike plate. Drill deadbolt hole in jamb with spade bit. Use strike plate to mark deadbolt hole on doorjamb. Close the door, throw bolt to leave mark on doorjamb. You are now in a position to remove the jam. Screw deadbolt mechanism to door, with keyed cylinder on the outside and turn lever on inside. If it didn’t, you need to remove it separately. Once this is done, you need to see whether the lock came free with the plate or not. You will need to twist the plate to the side slightly before it will come loose. Occasionally the outside faceplate is held in position by a small grub screw, which will need to be removed before the plate will move. There is usually a screw or two that keep it in place. This one can be slightly different to make sure people can’t gain easy access from the outside. Once that is removed go to the outside of the door and remove that. The insides of these locks have a fair number of parts and they need to be kept in order if you intend to continue using the lock once the jam is repaired. This is how you will gain access to the inner workings of the deadbolt lock. These screws are long and take a fair amount of time to unscrew, but take your time and make sure you don’t bend them. Store the screws in the order that you removed them so they can be screwed back in later.
DOOR DEADLOCK MANUAL
The manual turning of the lock is situated in the position where you find the screws. The little manual handle that turns the lock from the inside is what you use to access the interior workings of the deadbolt lock. If it was easy to do, burglars would have no trouble entering locked homes. These need to be removed in order to gain access to the deadbolt lock.
0 kommentar(er)
